Romain
Thank you - I'll try this a little later today.
--- In "bowbaq74000" <> wrote:
>
> Hi,
>
> To boot from the CFCard, you must change the RedBoot configuration.
> To do that, you reboot your card and type "CTRL+C" when RedBoot
start
> (when the '+' appear).
> After you must use the command : fconfig, then type :
> >> fis load vmlinux
> >> exec -c "console=ttyAM0,115200 root=/dev/hda1"
>
> Regards,
> Romain
>
>
> --- In "benoit.steve" <benoit.steve@>
> wrote:
> >
> > Hi
> >
> > I have a 7200 with a dev kit and the 512Mb CF flash card w/Linux
on
> it
> >
> > How do I boot from the CF card?
> >
> > board boots into the onboard BusyBox linux fine.
> >
> > with the cf card installed, I get the error "failed to identify
> unit 0" error msg and teh system
> > proceeds through to regualr onboard boot
> >
> > without the cf card - system boots to busybox
> >
> > thanks
> >
> > steve
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|