--- In Christopher Friedt <>
wrote:
are you saying compile the module should done on the local computer
not the TS board?
thanks
>
> Do a search on the yahoo groups page (under the group ts-7000) and
look
> for insmod pcipool. You'll find a list of modules that will need to
be
> loaded ahead of your camera module.
>
> Then, compile the v4l driver and the driver for your USB camera as
a
> module using make CROSS=arm-linux-, and copy the .o files over to
the
> board.
>
> It should work as long as you're using the same kernel version /
sources
> as TS used when then shipped your unit.
>
> After that it's a programming excercise - follow the v4l api and
use
> ioctls to address the /dev/video0 device.
>
> ~/Chris
>
> syedsmt wrote:
> > I'm doing for my Final Year Project using the SBC board. Need help
> > from you all how to connect usb webcam to SCB.thax..
> >
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|