ts-7000
[Top] [All Lists]

Re: [ts-7000] Re: mouse as flow meter

To:
Subject: Re: [ts-7000] Re: mouse as flow meter
From: Eddie Dawydiuk <>
Date: Thu, 13 Sep 2007 09:36:12 -0700
Hello,

> @Eddie, you asked to be notified of breakage: TS's "Linux for ARM 
> guide" says to insmod mousedev but it fails to be recognised as a 
> module and does not load.

What is the output of uname -r?

e.g.

:root# uname -r
2.4.26-ts11
:root# insmod mousedev
Using /lib/modules/2.4.26-ts11/kernel/drivers/input/mousedev.o
:root# lsmod
Module                  Size  Used by    Not tainted
mousedev                4252   0  (unused)
af_packet               9456   0
zd                    264068   0  (unused)
open_eth                4448   0  (unused)
tsuart-73               1380   0  (unused)
tsuart0                 9128   0  [tsuart-73]
keybdev                 1772   0  (unused)
hid                    13520   0  (unused)
input                   3320   0  [mousedev keybdev hid]
usb-ohci-ep93xx          632   0  (unused)
usb-ohci               15360   0  [usb-ohci-ep93xx]
usbcore                55728   1  [zd hid usb-ohci]
pcipool                 1888   1  [usb-ohci-ep93xx usb-ohci]
ts7300fb                3944  63
fbcon-cfb16             3528   0  [ts7300fb]
fbgen                   2944   0  [ts7300fb]
sdcard0                12304   1

-- 
Best Regards,
________________________________________________________________
  Eddie Dawydiuk, Technologic Systems | voice:  (480) 837-5200
  16610 East Laser Drive Suite 10     | fax:    (480) 837-5300
  Fountain Hills, AZ 85268            | web: www.embeddedARM.com


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU