Hi Fabian,
> Let me start with this basic question: Do I have to compile the
> TS-kernel before trying to compile the ADC? (My steps were
> uncompressing, pointing the Makefile and typing Make)
I believe that you have already answered most of your question
yourself. If you have a look at the info the you quoted in your post
you'll find ...
> > > I can see a few things that you might want to check. Firstly,
I
> > > realise that I haven't specified this in my INSTALL file (and
I have
> > > now changed it) but the kernel source needs to be properly
> > > _configured_, i.e. following the initial steps to compiling
the
> > > kernel, such as 'make oldconfig', 'make ts7250config', 'make
dep'
> > > (you just might need to check exactly what those commands are,
I am
> > > just recalling from memory).
So to answer the question in full: no, you don't need the kernel to
be "compiled", just "configured". Also, you might then want to check
this other point from the same post...
> > > Second thing, is to check that DEVFS is enabled in
the 'configured'
> > > kernel sources. You can type 'grep
DEVFS /path/to/kernel/.config' to
> > > find out. It is probably all ok, but just a check.
Let us know if you still have issues.
Cheers
Phil
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|