Hi All,
thanks for your answers.
As I am a little bit delayed on this project, I will start with the
adc_logger application.
It works pretty good and it can help me with my requirements. I am
planning to have 3 Channels at 200Hz, according to the adc_logger
readme it should be enough for my porpuses.
As soon as I finish the project I will explore the Kernel Version. I
don't want to give up with that :)
Thanks!
--- In "charliem_1216" <> wrote:
>
> Hi Fabian --
>
> --- In "fabianmejia" <fabianmejia@>
> wrote:
> >
> > Hi All,
> > I followed this thread, but I haven't been able to have the Max197
> > working.
>
> <snip>
>
> > Second: Is there any guide to read from the external ADC without
> using
> > this kernel stuff? I mean from the user-space? (I read some
> messages
> > mention this, but I haven't found any details)
> >
> > Thanks for your help.
> >
>
> No, you don't need a kernel module unless you want high speed data
> acquisition; you can get data from userspace. See:
> http://tech.groups.yahoo.com/group/ts-7000/message/7687
> which tells where to find Jim Jackson's userspace utilities
>
> Also, search for MAX197 in the group archives, there's a lot of info
> already written.
>
> Regards, ....... Charlie
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|