[ts-7000] ADC on the 7300

To:
Subject:	[ts-7000] ADC on the 7300
From:	"Yan Seiner" <>
Date:	Thu, 06 Sep 2007 16:26:10 -0000

I have a question on the manual for the TS7300.

On page 37 in the "DIO1 Header Pin Configuration" table, it shows ADC4
connected to pin 8.  But on page 38, it says:

On the TS-7300, the DIO Port pins 4 and 6 are connected to two of the
EP9302 12-bit A/D converter inputs (ADC0 and ADC4, respectively).

Which is it?

Thanks,

--Yan



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] ADC on the 7300, Yan Seiner <= Re: [ts-7000] ADC on the 7300, David Hawkins

Previous by Date:	Re: [ts-7000] Re: ts-7400 and linux 2.6.x kernel?, Martin Guy
Next by Date:	Re: [ts-7000] ADC on the 7300, David Hawkins
Previous by Thread:	[ts-7000] TS-PLC update, Michael Schmidt
Next by Thread:	Re: [ts-7000] ADC on the 7300, David Hawkins
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU