--- In "j.chitte" <> wrote:
>
> --- In David Hawkins <dwh@> wrote:
> >
> > Hi Laks,
> >
> > > I tried to compile a Hellomodule.
> > > i got the following errors
> > > could any one help me where i had gone wrong
> >
> > Start with this example
> >
> > http://www.ovro.caltech.edu/~dwh/ts7300/
> >
> > The code contains a hello module and makefile.
> > The document explains how to set things up.
> > It was tested on a TS-7300, but others have
> > used it on other TS boards.
> >
> > Cheers,
> > Dave
> >
>
> Hi Dave,
>
> I'm working through your notes which are a great help in cutting
down
> the ammount of research needed to put this together. Thanks a lot.
>
> One sticking point that seems to have been omitted is that
crosstool-
> 0.28 is firing off to install linux-2.6.8 , I can't see where it
gets
> this from or how to set it to 2.4.26
>
> I editted one of the .dat files and set LINUX_DIR=2.4.26 but it
does
> not seem to use that to chose the kernel , can you help?
>
> TIA.
>
Forget it I'd misselected glibc-2.3.3 instead of 2.3.2 in demo-arm.sh
, that was pulling in the wrong kernel.
Dislexia rule K.O. ;)
Thanks for the notes , a great help.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|