Hi, How exactly do I pass init=path/to/my program on the kernel? In
what folder or file to I edit to set it to that variable?
--- In Triffid Hunter <>
wrote:
>
>
>
> On Mon, 9 Jul 2007, Ameera wrote:
>
> >
> > Hi, I was wondering if it was possible to run a C-code executable
on
> > the ts-7300 board as stand-alone, that is without an OS. I know I
have
> > to change the boot kernel system, but I'm not sure how. And
honestly,
> > i'm not sure to go about it in general.
> >
> > Can anyone please offer me some assistance?
>
> Work out what state the system starts in or is put in by the
bootloader
> (you'll need the cpu datasheet, hardware specs and bootloader code
for
> this), write a startup routine to change it to the state you want
(often
> done in assembly) then jump to your code's start address (usually
gcc
> provides a trampoline called _start which sets up a few things and
calls
> main()).
>
> Your program will need to contain _all_ functions that it uses
including
> hardware-specific I/O (ie, no printf("") unless you implement one,
same
> with malloc(), fork(), open(), etc). You won't be able to use any
of the
> hardware unless you write drivers for it - I.E., can't read files
unless
> you implement 1) a flash device driver for the ts7300's flash
device and
> 2) a filesystem, you won't be able to use the network without
implementing
> a tcp/ip stack and drivers for the ethernet device, and you won't
be able
> to use serial without writing a driver for the cpu's serial port.
>
> The above are all things handled by the kernel or libc for you, and
would
> take a LOT of work to do yourself. You'd end up with half of the
existing
> kernel anyway.
>
> If you have time-critical I/O and use any functions provided by
libc or
> the kernel (including system setup routines like clock
initialisation, mmu
> configuration and memory allocation/management), look into using a
> real-time kernel or even a kernel module.
>
> The easiest way would be to keep the kernel and pass
> init=/path/to/your/program on its command line so you have all the
kernel
> and libc functions available as well as being the only process
running.
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|