--- In David Hawkins <> wrote:
>
> Hi Laks,
>
> > I tried to compile a Hellomodule.
> > i got the following errors
> > could any one help me where i had gone wrong
>
> Start with this example
>
> http://www.ovro.caltech.edu/~dwh/ts7300/
>
> The code contains a hello module and makefile.
> The document explains how to set things up.
> It was tested on a TS-7300, but others have
> used it on other TS boards.
>
> Cheers,
> Dave
>
Hi Dave,
I'm working through your notes which are a great help in cutting down
the ammount of research needed to put this together. Thanks a lot.
One sticking point that seems to have been omitted is that crosstool-
0.28 is firing off to install linux-2.6.8 , I can't see where it gets
this from or how to set it to 2.4.26
I editted one of the .dat files and set LINUX_DIR=2.4.26 but it does
not seem to use that to chose the kernel , can you help?
TIA.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|