While reading the EP9301 datasheet, I noticed that it can handle
megabaud rates. The UARTCLK input is used to adjust the baud rate.
The EP9302 also has 16550 compatible UARTS, so it should be able to
do megabaud rates. Has anyone had expeirence doing this?
--- In "Triffid Hunter" <>
wrote:
>
> On Fri, 24 Aug 2007 10:38:34 +1000, mrjbradski <> wrote:
>
> > --- In "mrjbradski" <rich@> wrote:
> >>
> >> I need to program the serial ports of my TS-7400 for the highest
speed
> >> possible. Can anyone show me an example?
> >>
> >> Thanks
> >> Rich
> >>
> > I found the answer, but Im not liking it. It seems that the
EP9302 can
> > only do 115k. I need 500k or better AND 9 bit serial communication
> > mode. Any simple solutions?
>
> see if the FT232R usb to serial chip supports 9 bit
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|