Hi Neil,
>> > If someone can explain to me how you compile a cross
>> > compiled driver outside the kernel
>>
>> These notes should help you setup a cross-compiler:
>>
>> http://www.ovro.caltech.edu/~dwh/ts7300/
>> <http://www.ovro.caltech.edu/~dwh/ts7300/>
>>
>> There's an example driver on that page, that you can
>> use to test your setup.
>
> Why that's the most bizarre thing, it's exactly what I need!
Oh, not so bizarre, its what you asked for :)
> I may also attempt to use libusb/libhid as that gets rid of
> the driver problem (needs to be compiled for each new kernel).
Sorry, haven't played with libusb. But as a general
rule for stuff like that, I'd play with it under
x86 Linux first, then figure out what doesn't work
on the TS-7300. It helps you eliminate errors with
the setup of the library, versus platform-specific
issues related to the setup on the TS-7300.
Cheers,
Dave
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|