[ts-7000] Entry point problem in TS-7200

[Mostafijur Rahman <>]

Hello all
 Im new user of TS-7200. I get a problem.When I power on my SBC then always RedBoot> come in display.I type the following command,it shows
 RedBoot>fis list
Name              FLASH addr  Mem addr    Length      Entry point (reserved)        0x60000000  0x60000000  0x00620000  0x00000000 RedBoot           0x60620000  0x60620000  0x00040000  0x00000000 vmlinux           0x60660000  0x00218000  0x00160000  0xFFFFFFFF RedBoot config    0x607C0000  0x607C0000  0x00001000  0x00000000 FIS directory     0x607E0000  0x607E0000  0x00020000  0x00000000
But Here is different. Another SBC shows for  vmlinux  Entry point is 0x00218000.But here 0xFFFFFFFF.
 
 How can I solve it? Pls inform me as possible as u can.
 
 Thanks.

---

Got a little couch potato? 
Check out fun summer activities for kids.
__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os	Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___