[ts-7000] ts9 and bluetooth

[Daniel Smolik <>]

Hi all,
I am running compiled ts9 kernel with bluetooh enabled and if I have 
inserted one adapter all works. But if I insert second

hci0:   Type: USB 

         BD Address: 00:15:83:BE:F3:F8 ACL MTU: 310:10 SCO MTU: 64:8 

         UP RUNNING PSCAN 

         RX bytes:696 acl:0 sco:0 events:21 errors:0 

         TX bytes:322 acl:0 sco:0 commands:19 errors:0 

 

hci1:   Type: USB 

         BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 

         DOWN 

         RX bytes:0 acl:0 sco:0 events:0 errors:0 

         TX bytes:6 acl:0 sco:0 commands:2 errors:0

this adapter is not initialized properly. Have anybody the same experience.

                        Thanks
                                Dan




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/