[ts-7000] TS-PLC: how to read state from the serial port ?

ts-7000

[ts-7000] TS-PLC: how to read state from the serial port ?

To:
Subject:	[ts-7000] TS-PLC: how to read state from the serial port ?
From:	"Rafael_Sotomayor" <>
Date:	Tue, 14 Aug 2007 23:58:04 -0000

I'm very interesting in this device. So, my question is about FLUSH
PHASE. 

Can I read the serial data that communicates state changes from
another device like TS-7200 or any other device with serial.

Regards
Rafael 




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS-PLC: how to read state from the serial port ?, Rafael_Sotomayor <= Re: [ts-7000] TS-PLC: how to read state from the serial port ?, Michael Schmidt

Previous by Date:	[ts-7000] Re: using matlab functions in cygwin, victorp_27
Next by Date:	[ts-7000] pinout for DIO, j.chitte
Previous by Thread:	[ts-7000] Re: libusb, pablo.rolando
Next by Thread:	Re: [ts-7000] TS-PLC: how to read state from the serial port ?, Michael Schmidt
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU