yep, am using jamod! My code works fine on another platform (Dallas
Semiconductor TINI). However on TS-7250 I'm having this problem (error
reading response). Must be missing some parameter in my serial
parameters. The only real difference in the code for the two
platforms is the setting of RTSCTS flow control (TINI has its own API
for doing this, jamod uses SerialParameters for the same purpose).
--- In Joel Winarske <> wrote:
>
> tedapt wrote:
> > Ok, have rxtx now working properly with a simple Java application (had
> > been using an improperly shorted null model cable in my testing.) Once
> > that was cleared up I was able to both read and write the serial port
> > (following all the instructions on commenting out /etc/inittab, etc.
> > as noted earlier in this thread).
> >
> > Still having a problem with Modbus, but that's a whole different
> > kettle of fish... Thanks for all the help!
> >
>
> Have you checked out Jamod?
> http://jamod.sourceforge.net/
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|