Hi --
There are a few SPI drivers:
http://marc.info/?l=linux-arm-kernel&m=117741750521238&w=2, and
http://marc.info/?l=linux-arm-kernel&m=118364323516641&w=2
I haven't used either, however. Both are for a recent 2.6 linux
kernel, so unless you are considering a 2.6 kernel, they won't do
you much good. But they may give you some ideas ....
Regards, ...... Charlie
--- In "zebulon7482" <> wrote:
>
> hello,
>
> I have a ts-7250 board and I want to connect 20 adc channels with
the
> SPI interface. Is there a driver for spi or do I have to use the
> manual configuration of ssp with peek & poke functions (as in the
> temperature sensor sample program) ?
>
> thank u
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|