Thank you,
I'm going to test this driver but I must update to 2.6 kernel...
I'm going to start by measuring performances of spi using peek & poke
functions in the user space.
Regards,
Antonin
--- In "charliem_1216" <> wrote:
>
>
> Hi --
>
> There are a few SPI drivers:
> http://marc.info/?l=linux-arm-kernel&m=117741750521238&w=2, and
> http://marc.info/?l=linux-arm-kernel&m=118364323516641&w=2
>
> I haven't used either, however. Both are for a recent 2.6 linux
> kernel, so unless you are considering a 2.6 kernel, they won't do
> you much good. But they may give you some ideas ....
>
> Regards, ...... Charlie
>
>
> --- In "zebulon7482" <totofri@> wrote:
> >
> > hello,
> >
> > I have a ts-7250 board and I want to connect 20 adc channels with
> the
> > SPI interface. Is there a driver for spi or do I have to use the
> > manual configuration of ssp with peek & poke functions (as in the
> > temperature sensor sample program) ?
> >
> > thank u
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|