Hi Siddharth,
I fixed the typo that you found. Did you modify the .config at all
before compiling? I just tried that script again and I didn't run into
any issues.
You might want to try the toolchain on Yan Seiner's site. It's using
gcc-3.4.4, a slightly more recent glibc, etc. I'm not even sure if I
tried compiling the 2.6 kernel with TS's toolchain, but I might have
just started using the crosstool-0.38 package below right away.
http://www.seiner.com/ts7000/index.php/CrossCompileTools
http://www.seiner.com/ts7000/crosstool-0.38.tar.bz2
I hope that helps.
~/Chris
siddh_c wrote:
> /tmp/cc6LAzFe.s: Assembler messages:
> /tmp/cc6LAzFe.s:3018: Error: .err encountered
> make[1]: *** [mm/page_alloc.o] Error 1
> make: *** [mm] Error 2
>
> I'm using arm-gcc 3.3.4 (compiled out of crosstools).
>
> I also tried the steps given at an earlier thread -
> http://tech.groups.yahoo.com/group/ts-7000/message/5497
>
> The first nF bit patch, serial uartbaud works, but the Machine ID fix
> fails (http://svn.wantstofly.org/kernel/local.diff). There seems to
> be no file in arch/arm/common/npe.c in the vanilla 2.6.22 kernel. Is
> there some other arm related patch that I am missing ?
>
> thanks in advance,
> -siddharth
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|