Hello,
> I have a TS7400Devkit, it was working very well, but today, I removed
> the TS9440 board and the system has halted.
> Now the green led is blinking. I did not find and reference to this
> led in manuals.
> So, I would like to know, what is going on? What means the blinking
> green led (the red led some time blink once).. How can I fix it (if I can)?
> Please, help me to solve this issue.
The EP9302 will blink the green LED if no bootable devices can be found.
The WDT will reset the board every 8 seconds, the red LED will be
blinked once when this happens. If this is the LED pattern you are
seeing it indicates you're e2 has been corrupted/erased. You can boot to
the TS-9441 and use the tsbootrom-update utility to reprogram your e2.
ftp://oz.embeddedarm.com/ts-arm-linux-cd/binaries/ts-utils/tsbootrom-update
--
Best Regards,
________________________________________________________________
Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
16610 East Laser Drive Suite 10 | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|