To: | |
---|---|
Subject: | [ts-7000] accessing extra ADC on 7250 |
From: | "j.chitte" <> |
Date: | Mon, 23 Jul 2007 09:21:41 -0000 |
Hi, the sample code in adc_7250.c shows how to control the five ADC channels on the std 7250. Where is the documentation relating to use of the optional extra 8 channels? also the example following line relating to converting the ADC input data but there is no comment as to why this is needed or the meaning of the 0x7000 test. if(avg < 0x7000) avg = avg + 0x10000; Neither do I see anything in the Cirrus data sheet that would explain this. Can anyone shed any light of this? TIA Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/ts-7000/join (Yahoo! ID required) <*> To change settings via email: <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [ts-7000] Re: IP address question, j.chitte |
---|---|
Next by Date: | [ts-7000] Re: qemu & native arm compilation, j.chitte |
Previous by Thread: | [ts-7000] lego mindstorms and ts-7000, Roger |
Next by Thread: | [ts-7000] Re: accessing extra ADC on 7250, charliem_1216 |
Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU