Hi Marco
Indeed, I would say you don't need to change anything in redboot, as
far as your application is running under linux. The only important IP
address in this case is, as you said, the one in /etc/sysconfig/ifcfg-
eth0.
The IP address under redboot has to be set for example if you want to
load a kernel directly by connecting and downloading it from a server
on your network.
Julien
--- In "marcolamonato" <> wrote:
>
> Hi all,
>
> when I need to change the static ip address of my TS-7250 I usually
> edit the /etc/sysconfig/ifcfg-eth0 and then change the address also
> within RedBoot with the fconfig command.
>
> Is there a way to change the static ip address from my application
> without moving to Redboot also?
>
> Probably I'll need to reboot after editing some network files, but
this
> would be a small issue, thi big one is not to enter RedBoot.
>
> Same thing for changing from static to dhcp?
>
> Thanks in advance,
> Marco
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|