| To: | |
|---|---|
| Subject: | [ts-7000] Re: using GSM module |
| From: | "lerougegorge" <> |
| Date: | Wed, 18 Jul 2007 19:48:00 -0000 |
I think the problem may be the board does not have power, or is
malfunctioning: I believe the LED should be on or flashing at 2 Hz.
Here is my configuration:
- On TS-7260 only JP2 and JP3 ON, all others OFF.
- On TS-GSM1 JP5 is ON (auto start up), IRQ 7 is ON, all others OFF.
Should the light be on? How can I get it on? I do have a valid SIM
installed.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] VFAT on an SD Card, Frank Pagliughi |
|---|---|
| Next by Date: | Re: [ts-7000] System command "stat" doesn't seem to exist, Jim Jackson |
| Previous by Thread: | RE: [ts-7000] Re: using GSM module, Chris Heismann |
| Next by Thread: | [ts-7000] System command "stat" doesn't seem to exist, Fred |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU