Elizabeth,
I beleave it is the .rbf file you need to use. But when I load that
file with load_ts7300 it seams to lock up my board. I know this
because I have had Technologic supply me with new FPGA byte code and
it was in a .rbf file format. So I know the next step is Load_ts7300
but I am consurned if you have to shutdown drivers that use the FPGA
before changing it? I suspect that is where my problem is.
--- In "Elizabeth" <> wrote:
>
> Hi Bibhu
> Im starting to work with the Cyclone II FPGA of a ts7300, i've already
> loaded the .qrf file into the board after compiling it at quartus II
> but now i wanna know what is next, i mean where or how can i see the
> output. maybe by now you know the answer, please let me know.
>
> thanks..
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|