[ts-7000] Re: TS-7300 FPGA

To:
Subject:	[ts-7000] Re: TS-7300 FPGA
From:	"Elizabeth" <>
Date:	Sun, 01 Jul 2007 01:45:29 -0000

Hi Bibhu 
Im starting to work with the Cyclone II FPGA of a ts7300, i've already
loaded the .qrf file into the board after compiling it at quartus II
but now i wanna know what is next, i mean where or how can i see the
output. maybe by now you know the answer, please let me know.

thanks..



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Re: TS-7300 FPGA, Elizabeth <= [ts-7000] Re: TS-7300 FPGA, Art

Previous by Date:	Re: [ts-7000] insmod sdcard.o, Angel Rodriguez
Next by Date:	Re: [ts-7000] Re: I built a 2.6 kernel; now what? :), Jason Stahls
Previous by Thread:	Re: [ts-7000] insmod sdcard.o, Angel Rodriguez
Next by Thread:	[ts-7000] Re: TS-7300 FPGA, Art
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU