Re: [ts-7000] RS485 on TS-SER4

[Jason Stahls <>]

IMHO, check it with a scope, make sure the BlackBox isn't misconfigured.

Jason

wimpunk wrote:
> Hi Group,
>
> We're still having troubles talking RS485 on our TS-SER4 board.  These
> are the step we took:
> * Set the jumper on RS-485
> * Set the bit in the register (see message #7467)
> * We connected RX/TX+ (pin1) and RX/TX- (pin6) to our blackbox
> RS232/RS485 convertor.
>
> We did several tries to talk to the port (sending and receiving) but
> without anything result.  Even when setting RTS on sending, there's no
> signal.
> Does anyone has any suggestion on what we could do wrong?
>
> Kind regards,
>
> wimpunk.
>  
>
>
>
>  
> Yahoo! Groups Links
>
>
>
>
>   


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/