[ts-7000] RS485 on TS-SER4

["wimpunk" <>]

Hi Group,

We're still having troubles talking RS485 on our TS-SER4 board.  These
are the step we took:
* Set the jumper on RS-485
* Set the bit in the register (see message #7467)
* We connected RX/TX+ (pin1) and RX/TX- (pin6) to our blackbox
RS232/RS485 convertor.

We did several tries to talk to the port (sending and receiving) but
without anything result.  Even when setting RTS on sending, there's no
signal.
Does anyone has any suggestion on what we could do wrong?

Kind regards,

wimpunk.
 



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/