Re: [ts-7000] insmod sdcard.o

[Jason Stahls <>]

If you have a SD slot, odds are the CPLD has been programmed for it, unless of course you put the card slot there...  A CPLD is not like the FPGA used on some TS boards in that you don't have to load software into it every boot.  The CPLD is programmed by TS when the board is built.

Jason

Angel Rodriguez wrote:

Hi,

In reading over some more of the archives about why sdcards don't work I noticed that Eddie said that the ts-7260 has to have some proper firmware loaded in order for the SD card to work

Quoting Eddie " ... the CPLD needs to programmed with the correct firmware ... for the sdcard to work"

Is there any way to tell if that programing has happened?

Angel

__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os	Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___