On Thu, June 28, 2007 3:59 pm, Steve Galle wrote:
> Hello I'm writing to see if anyone has ever run across the following
> glitch.
>
> When using the ts-rf2-cf compact flash board on my 7260 (with latest
> drivers downloaded from ftp site), I keep getting the following
> messages in the console:
>
> hda: status timeout: status=0xd0 { Busy }
>
>
>
> hda: no DRQ after issuing WRITE
>
> ide0: reset: success
>
> Sometimes this repeats many times in a row, and sometimes it just
> throws one or two. Is there a parameter I should be passing to the ide
> driver that I'm not currently passing? (per the instructions, I'm
> using "options=ide0,0x108,0x106,33" I've put the cf card through a
> check with 'badblocks' and through an fsck (which reported errors) on
> another linux box using a card reader, I've tried changing the memory
> address and irq of the rf2. Right now I'm rebuilding the kernel and
> modules. Trying a different card is also on the list of things to try.
>
> Any other ideas I should be thinking about?
>
Looks like you are using Linux IRQ 33 (ISA IRQ6) on the CF board. Have
you got anything else trying to use that IRQ? You might try moving the
JP3 jumper to JP4 and passing "options=ide0,0x108,0x106,40" to see if that
works better.
> thanks,
> Steve
Regards,
_________
Michael / _____/chmidt michael AT embeddedArm DOT com
\_____ \ 16610 East Laser Drive #10
/ \ Fountain Hills, AZ 85268
Technologic /_______ /ystems (480) 837-5200
\/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|