Hello I'm writing to see if anyone has ever run across the following
glitch.
When using the ts-rf2-cf compact flash board on my 7260 (with latest
drivers downloaded from ftp site), I keep getting the following
messages in the console:
hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE
ide0: reset: success
Sometimes this repeats many times in a row, and sometimes it just
throws one or two. Is there a parameter I should be passing to the ide
driver that I'm not currently passing? (per the instructions, I'm
using "options=ide0,0x108,0x106,33" I've put the cf card through a
check with 'badblocks' and through an fsck (which reported errors) on
another linux box using a card reader, I've tried changing the memory
address and irq of the rf2. Right now I'm rebuilding the kernel and
modules. Trying a different card is also on the list of things to try.
Any other ideas I should be thinking about?
thanks,
Steve
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|