ts-7000
[Top] [All Lists]

[ts-7000] TS-7400 and zonet 802.11 problem

To:
Subject: [ts-7000] TS-7400 and zonet 802.11 problem
From: "robertbedichek" <>
Date: Fri, 29 Jun 2007 13:27:41 -0000
I followed TS's instructions, but the command

ifconfig wlan0 up

gives the error message

wlan0: ERROR while getting interface flags: No such device

lsmod shows the zd module (and the USB modules) are loaded.

When I stick the Zonet USB dongle in, my dmesg log gets these lines

hub.c: new USB device not_pci-3, assigned address 4
usb.c: USB device 4 (vend/prod 0xace/0x1215) is not claimed by any
active driver.

Otherwise, the TS-7400 worked out of the box.  The unit was shipped
from TS on Monday, FWIW.

Thanks in advance for any help.

Rob



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU