Thanks for the post, but this didn't work. I think I saw somewhere
that there were drivers compiles specifically for the 7400 and the
location you quoted was for those. I thought is worth giving it a
shot though so I downloaded the zdb.o files and tried to install the
module. It locked the board up completely. I had to hard reset it.
So, I'm still unable to get any wireless working on my board. If
anyone has succesfully used zd.0 on a TS-7250 running ts11 could you
please post what steps you went through to make it work? Thanks,
--- In "ilinsdell" <> wrote:
>
> I have been working on getting wireless working also.
>
> I have a shuttle USB wireless as shipped by technologic which uses
> the zd1211 chipset and also went out to buy a Airlink 101 Model:
> AWLL3026 which uses the zd1211b chipset.
>
> I have managed to get the Airlink functioning with (WEP with key) but
> still have some issues with the 7400 freezing for no apparent reason
> from time to time and have not got the WAP working yet.
>
> I did the following to get it working:
>
> 1. Use the zdb.o driver for the AWLL3026, not the zd.o or zd_b.o.
> you can download this from
> ftp://oz.embeddedarm.com/wireless/zd1211/r83/ts7400/
>
> 2. For some reason I had to use the following two commands to get the
> Wireless to associate with the Access Point:
> $ iwlist wlan0 scan
> $ iwpriv wlan0 connect <Cell Number from iwlist resilts>
>
> This is mentioned in the 1211 documentation: ftp://ftp.a-
> link.com/wl54usb/v6.19.0.0/UserGuide_Linux.pdf
>
>
> Hope this is helpful,
>
> Ian.
>
> --- In "loki2517" <loki1725@> wrote:
> >
> > I have a TS-7250 running ts11 kernel and I am trying to get a
> 802.11g
> > usb dongle to work. I am using an Airlink 101 key witch uses the
> > zydas1211 chipset. I have downloaded the zd.0 compiled for ts11, as
> > well as zd_b.o. When I follow the instructions in the ARM manual, I
> > am able to install all of the modules if I use zd.o. However, when
> I run
> > ifconfig wlan0 up
> >
> > I get this error. "SIOCGIFFLAGS: No such device" I have looked on
> > the board for wlan0 and can't find any reference to it. Should any
> of
> > the modules have created a file ifcfg-wlan0 in /etc/sysconfig like
> > eth0 and lo? Or am I not thinking about this right?
> >
> > I looked through the archives here and found some people had used
> the
> > zd_b.o and it solved their problems. However, when I try and
> install
> > that module, by entire board freezes up. I've done it a few times
> now
> > and it never works. If this will solve my problem, does anyone know
> > why it would lock my board up?
> >
> > Regards,
> >
> > Nathan
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|