On Thu, Jun 14, 2007 at 10:40:58PM -0000, loki2517 wrote:
> I have a TS-7250 running ts11 kernel and I am trying to get a 802.11g
> usb dongle to work. I am using an Airlink 101 key witch uses the
> zydas1211 chipset. I have downloaded the zd.0 compiled for ts11, as
> well as zd_b.o. When I follow the instructions in the ARM manual, I
> am able to install all of the modules if I use zd.o. However, when I run
> ifconfig wlan0 up
>
> I get this error. "SIOCGIFFLAGS: No such device" I have looked on
> the board for wlan0 and can't find any reference to it. Should any of
> the modules have created a file ifcfg-wlan0 in /etc/sysconfig like
> eth0 and lo? Or am I not thinking about this right?
>
> I looked through the archives here and found some people had used the
> zd_b.o and it solved their problems. However, when I try and install
> that module, by entire board freezes up. I've done it a few times now
> and it never works. If this will solve my problem, does anyone know
> why it would lock my board up?
>
> Regards,
>
> Nathan
please post results from dmesg, lsmod, cat /etc/network/interfaces, etc.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|