Hi Daniel,
> Okay Breton, this i understand perfectly.
> But now my further Questions again. ;)
>
> 1.
> mtd0 -> uses 20MB of Memory (approx, possibly the above described start
> code? ;)) and some Bytes are in the rest is 0xff (NAND Typical for empty i
> read...) mtd1 -> 2MB this is for the kernel i see..., mtd2 -> zipped ext2
> initrd, mtd3-> 16,5MB unused (seems so). Is possible to repartition it?
>
No - I don't believe so. The partition table is fixed in TS's driver -
have a look at their source in the kernel directory driver/mtd/nand -
the file in there is ts* (I can't remember TS's 2.4 name. In 2.6 its
ts7250.c).
> 2.
> The Kernel when i build by myself let me not use the sdcard anymore? the code
> for the sdcard is closed source? The reason i ask is that my lil app should
> access the sdcard to write down a small database for storing some
> information. Someone know if i can use the kernel inotify for detecting the
> replacing during the run? or must i first turn off the board?
>
TS implement their SD card in the CPLD, and supply an object module
sdcard.o to use in making drivers - it would be best to ask them how to
bind this into your kernel - Eddie?
I've been meaning to do a "2.6.19 for TS7400" but unfortunately, have
virtually no time at the moment to do this.
Cheers,
-Brett
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|