ts-7000
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[ts-7000] Some Questions about the TS-7400

from [Daniel Rindt] [Permanent Link][Original]
To:
Subject: [ts-7000] Some Questions about the TS-7400
From: Daniel Rindt <>
Date: Fri, 8 Jun 2007 13:50:27 +0200 
Hello Listmembers,

some Questions i had about the TS-7400.
i had build myself an YAFFS2 Image, this contains my application and some
librarys which are the app needs to run properly.

how i can load this image into the nand flash and boot from them?
can i place a kernel in the image and boot them too?
accessing the sdcard is only possibly through the propritaery kmod?

I'm currently not sure how i can done this. The Manual told me that i can
update the kernel via redboot but seems that my board not show me over the
serial line the bootloader.

Some HOWTO's are present for doing the tasks above?

Thanks in advance
Daniel

Attachment: pgpJytJ3G6GF0.pgp
Description: PGP signature

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [ts-7000] Redboot, 'fis delete' won't let me delete vmlinux ??, Kym Newbery
Next by Date:  [ts-7000] Re: Float point support, charliem_1216
Previous by Thread:  [ts-7000] Redboot, 'fis delete' won't let me delete vmlinux ??, Kym Newbery
Next by Thread:  Re: [ts-7000] Some Questions about the TS-7400, Eddie Dawydiuk
Indexes:  [Date] [Thread] [Top] [All Lists]
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU