Am Sonntag, 10. Juni 2007 19:27 schrieb jcunningham63:
> Since I can't insmod anything I suspect I don't have the modules
> installed properly. Any idea what I'm doing wrong?
Sorry that iam not having a solution but i have possibly the same problem, my
running Kernel:
=== 8> ===
Linux ts7000 2.4.26-ts11 #1 Mon Dec 18 16:31:10 MST 2006 armv4l GNU/Linux
=== 8> ===
and after plugin a USB Harddrive i get the following:
=== 8> ===
usb.c: registered new driver hci_usb
hub.c: new USB device not_pci-1, assigned address 3
usb.c: USB device 3 (vend/prod 0x5e3/0x702) is not claimed by any active
driver.
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: SAMSUNG Model: SP0842N Rev: 0811
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
USB Mass Storage support registered.
=== 8> ===
normally i want to find out which devnode is the right i try:
=== 8> ===
:root# fdisk -l
Disk /dev/sdcard0/disc0/disc: 1019 MB, 1019215872 bytes
16 heads, 32 sectors/track, 3888 cylinders
Units = cylinders of 512 * 512 = 262144 bytes
Device Boot Start End Blocks Id System
/dev/sdcard0/disc0/part1 1 6 1520 da Non-FS
data
/dev/sdcard0/disc0/part2 7 10 1024 da Non-FS
data
/dev/sdcard0/disc0/part3 20 1940 491776 83 Linux
Disk /dev/sdcard0/disc0/part1: 1 MB, 1556480 bytes
16 heads, 32 sectors/track, 5 cylinders
Units = cylinders of 512 * 512 = 262144 bytes
Disk /dev/sdcard0/disc0/part1 doesn't contain a valid partition table
Disk /dev/sdcard0/disc0/part2: 1 MB, 1048576 bytes
16 heads, 32 sectors/track, 4 cylinders
Units = cylinders of 512 * 512 = 262144 bytes
Disk /dev/sdcard0/disc0/part2 doesn't contain a valid partition table
Disk /dev/sdcard0/disc0/part3: 503 MB, 503578624 bytes
16 heads, 32 sectors/track, 1921 cylinders
Units = cylinders of 512 * 512 = 262144 bytes
Disk /dev/sdcard0/disc0/part3 doesn't contain a valid partition table
=== 8> ===
but all what i get is the content from the sdcard. :(
I had using a flash key and i get the same.
Someone has a solution for this problem?
Thanks in Advance
Daniel
pgp38mcIcxe8M.pgp
Description: PGP signature
|