Hi Andrea,
I got to the point where you were awhile ago. I wonder if you
got any reply on:
Re: How to compile alsa on TS-7400 [solved] But how to use it?
Or may be you finally figured out how to properly use bootload?
I build vmlinux on TS-7400 using Debian on SD from TS (kernel
sources are located on other linux box); then I am trying to
start this image from inside the Debian using:
insmod -f bootloader.o
./bootload -c "console=ttyAM0,115200 root=/dev/ram0" vmlinux.bin
New image runs, I see output on the console, but
it fails saying:
yaffs: dev is 256 name is "01:00"
yaffs: Attempting MTD mount on 1.0, "01:00"
Kernel panic: VFS: Unable to mount root fs on 01:00
I thought you may know correct syntax for bootload...
Thanks,
Igor
--- In Ciaccia <> wrote:
>
> Hi Igor,
> The driver is not in the distro, it's part of the kernel. Download
the latest 2.4.26-ts11kernel from here: ftp://ftp.embeddedarm.com/ts-
arm-linux-cd/sources/ts7400_tskernel-2.4.26-ts11-may152007.tar.gz
>
> In /linux24/drivers/sound
> there are the files needed for enabling EP93xx OSS in the TS 2.4
kernel. More specifically, ep93xx-i2s.c contains the code for the
I2S controller + code for some CS codecs (CS4271 and CS4228A). The
driver itself is not very well written (the codec code should not be
mixed with the pcm code), but Cirrus wrote the driver like that...
>
> Bye
> Andrea
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|