--- In "Oðuzhan" URHAN <> wrote:
>
> Hi,
>
> I'm quite a newbie about Linux and TS7200 but have
> general knowledge about systems. I would like to run a
> simple helloworld program on the TS7200. However I
> have some problems. Firstly, I have configured TS7200
> network setting to access it. Now I'm can reach the
> TS7200 over telnet or FTP. TS-Linux OS is run on the
> TS-7200.
>
> I would like to develop my application on using a
> Windows XP installed X86 PC. Therefore, following the
> "Linux for ARM on TS-7000 User's Guide" entitled
> document (i.e. linuxarm-guide-rev.2.2.pdf), I have
> downloaded latest version of Cygwin (version
> 2.510.2.2). Next, I downloaded TS-ARM Linux CD (i.e.
> tsarmlinuxcd-05-20-2006) from website of TS. I extract
> the crosstool-cygwin-gcc-3.3.2-glibc-2.3.2.tar.bz2
> file in the cross-toolchains folder. At the end of
> this, I have "opt" folder. I copied the opt folder to
> the usr/local/ directory of the cygwin.
>
> Now, following the instruction on page 35 of "Linux
> for ARM on TS-7000 User's Guide" I have tried to
> compile my hello-world.c file. However, I couldn't
> succeed it. I'm sending screenshot of the error I have
> encountered. Could you please guide me about the
> problem?
>
> Thanks in advance,
>
> Oguzhan.
>
>
*******************************************************************
Hi,
I have managed to crosscompile c code under Cygwin. I will detail some
of my settings that i have found work ok.
1. I work in my home directory /home/Geoffrey .In your case the last
name will probably be your own login name. I put my c code in this
directory. In this case it might be hello.c
2. I make a simple text file hello.sh . This is a script file in Linux
a bit like a BAT file in dos. This allows you to run batch commands in
this case by typing at the $ prompt hello.sh . My script looks like this..
# Script written to automate commands.
arm-unknown-linux-gnu-gcc -Wall -o hello hello.c
You could type enter this line each time at the $ prompt, but it get
very boring. Less typing to run the script file.
3. Make sure the compiler arm-unknown-linux-gnu-gcc directory is in
your path statement in .bashrc .This file .bashrc is a text file in
your home directory, in my case /home/Geoffrey .I have added the
following line at the end of this file so the compiler is found..
export
PATH=$PATH:.:/home/geoffrey:/opt/crosstool/arm-unknown-linux-gnu/gcc-3.3.2-glibc-2.3.2/bin
This is all entered on one line and it sets the directories where the
bash shell looks to find a file. Note that I have installed my cross
compiling files at C:/cygwin/opt/crosstool.. I think you put them on a
branch from your home directory. Both might work, but I can only say
that it works where I put it.
4. Once you have done all these thing you should just need to type..
$ hello.sh
This should start the compiling and linking process giving you an
executable file in the same directory that can run on your TS-7200.
Geoff Veale
**************************************************************
>
>
____________________________________________________________________________________
> Need Mail bonding?
> Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.
> http://answers.yahoo.com/dir/?link=list&sid=396546091
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|