Re: [ts-7000] Success! Kernel + modules compiled and loaded!

[David Hawkins <>]

Hi Jason,

> Why fdisk defaulted to a partition type of 0xb or 0xc who knows, but the 
> proper partition type should be 0x83 (linux).  You can set this by 
> running 'fdisk /dev/<device>' where device is say hda for on a TS7200.  
> Then hit T at the prompt, enter a partition number, which would probably 
> be 1, then enter the code 83, hit enter, type W, hit enter, confirm, and 
> tada it's done

Cool! I just received a couple of SD cards, and I plan to
create a new boot card for a TS-7300, so this info will
probably come in handy.

And before anyone suggests it, I know Yan Seiner recently
updated his notes on his wiki, so I'll check those out too.

Thanks!
Dave


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/