[ts-7000] problems with my 7300 again

To:
Subject:	[ts-7000] problems with my 7300 again
From:	"juanyrascon" <>
Date:	Sat, 26 May 2007 07:33:21 -0000

When the JP2 is on, the green and red leds still blinking forever,
but, if the JP1 is on and the JP2 is off, the leds working fine.

how can I detect the problem that it does not booting with the SD? 

Thanks, Juan.



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] problems with my 7300 again, juanyrascon <=

Previous by Date:	[ts-7000] Booting Debian Sarge, Jason Stahls
Next by Date:	[ts-7000] CF Drive not ready Ts-7200, fabianmejia
Previous by Thread:	[ts-7000] Booting Debian Sarge, Jason Stahls
Next by Thread:	[ts-7000] CF Drive not ready Ts-7200, fabianmejia
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU