[ts-7000] Booting Debian Sarge

[Jason Stahls <>]

I'm not sure if this is something that I've mucked up in my kernel 
setups ect or not but when I boot Debian off CF or NFS on my 7200 I 
_must_ specify the IP for the ethernet as a kernel argument like this

exec -c "console=ttyAM0,115200 root=/dev/hda1 
ip=10.0.1.94::10.0.1.4:255.255.255.0"

If I don't, I can't bring up the interface at bootup nor via "ifup eth0" 
I get this

Configuring network interfaces...Operation failed.
Failed to bring up eth0.


Any idea's where I might have mucked up?

Jason


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/