Just extract the tarball to (e.g.) /root. See page 35 of the
linuxarm-guide-rev2.2 for a tutorial.
The problem I have is an error message on the SBC like:
./hello: 1: Syntax error: newline unexpected
I've tried to make many small adaptations to the original hello.c, but
even without empty lines I got this error. :(
Anyone an idea?
--- In m("yahoogroups.com","ts-7000");">, "Don W. Carr" m("...","doncarr");"><> wrote:
The cross tools, as far as I know, are only compiled for Windows (using
cygwin), or Linux, just about any kernel works. Since OSX is based
on a unix
kernel, it should not be a problem to compile the cross tools for
the Mac,
but somebody would have to do that. Don.
On 5/21/07, cingospet m("...","craig_d_1");"><> wrote:
I downloaded the GCC4.0.1 crosstools and am puzzled about how to
install
and use them.
There is no information or hints on installing/configuring. I
would like
to use a PCC Mac as
the development platform.
Any clues on where to go to install the cross compiler?
Craig
--
Dr. Don W. Carr
J. G. Montenegro 2258
Guadalajara, Mexico
+52-333-630-0704
+52-333-836-4500 ext 2930
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
m("yahoogroups.com","ts-7000-digest");">
m("yahoogroups.com","ts-7000-fullfeatured");">
<*> To unsubscribe from this group, send an email to:
m("yahoogroups.com","ts-7000-unsubscribe");">
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/