--- In wrote:
>
> Yes... very big step in fact.
>
> TS has some pre-built kernels, but the ones they provided (at least
at the
> time I built my kernel) did not work with the 7250 I purchased last
year.
>
> Start with "Getting Started with RTAI on TS-7000"
> ftp://oz.embeddedarm.com/rt/rtaiguide.pdf
>
> Ignore the parts about the pre-built kernels and go to "Building
TS-Linux
> source" on page 4. The good news is that you can use all the
TS-supplied
> patches to build your kernel. I think the only thing you might have
to do
> is an additional patch for the flash
>
> I didn't build the kernel in cygwin, but I have built rtai
applications in
> cygwin using the TS supplied toolchain.
So following the directions in the .PDF gets me stuck.
1. I tried to do it on the target board, but when you un-tar the
'linux24-ts8-kernelsource.tar.gz' it runs out of room, wants like
160MB. So this option is out
2. Go to Cygwin. Untar the source fine. Then I get to the Adeos patch
- the 'patch' command from the 'patch -pl < ../ts72xx_ts8_adeos.patch'
does not appear to be a valid command under Cygwin.
Is there a workaround for the 'patch' command or am I still missing
something?
Also, it doesn't recoginize 'make' which concerns me as this seems
pretty important.
Does anyone know if I setup the environment wrong? I have found very
little documentation on that portion of things.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|