Re: [ts-7000] Re: Problem with 2 bluetooth dongles on TS-7200

["siddhant tewari" <>]

hi,
      My problem is that i can access the hardware plugged in USB (bluetooth dongle) but if i plug both the adapters at the same time , at any time only one of the dongle works correctly.

To access any of them i have to put other down by issuing the command

hciconfig hci0 down

and then put another one up by 

hciconfig hci1 up

and vice versa.

Please suggest what should i do.

regards
siddhant

On 16 Apr 2007 10:25:53 -0700, Eddie Dawydiuk <> wrote:

Hello,

> please tell ... it would be great help if someone can tell whether
> issue given below was resolved and if yes how ......

See messages #1193.
http://tech.groups.yahoo.com/group/ts-7000/message/1193

Best Regards,
__________________________________________________________
Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
16610 East Laser Drive Suite 10 | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com

> --- In ts-7000%40yahoogroups.com, "qrahlag" <> wrote:
>>
>> Hi,
>>
>> I see that my /proc/bus/usb/devices is missing. Perhaps that the
>> cause?
>>
>> I have so far only run loadUSBModules.sh to access by USB devices
>>
>> I have also tried to mount the filesystem:
>>
>> /dev/root on / type yaffs2 (rw)
>> none on /dev type devfs (rw)
>> /proc on /proc type proc (rw)
>> /proc/bus/usb on /flash type usbdevfs (rw)
>>
>> But still /proc/bus/usb contains no "devices"..
>>
>> Something else I have to do?
>>
>> / Hakan
>>
>>
>>
>>
>>
>>
>>
>> --- In ts-7000%40yahoogroups.com, "Baschieri Francesco"
>> <fbaschieri@> wrote:
>>>
>>> Hi,
>>>
>>> I'm facing the following problem on a TS-7200 board. The board is
>>> equipped with the standard TS-linux release and by loading the
>> proper
>>> modules I'm able to use a single bluetooth dongle.
>>>
>>> But when I plug another dongle into the 2nd USB port I'm unable do
>> make
>>> it work.
>>>
>>> The only way to bring it up is to make
>>>
>>> hciconfig hci0 down
>>>
>>> and then
>>> hciconfig hci1 up
>>>
>>> and then it works.
>>>
>>> But I'm only able to operate a single BT dongle at a time. On my
>>> development machine (laptop) everything works fine.
>>>
>>> Anyone facing the same problem?
>>>
>>> Tanks in advance
>>> Francesco
>>>
>>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>

__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os	Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___