Hello,
> please tell ... it would be great help if someone can tell whether
> issue given below was resolved and if yes how ......
See messages #1193.
http://tech.groups.yahoo.com/group/ts-7000/message/1193
Best Regards,
______________________________________________________________
Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
16610 East Laser Drive Suite 10 | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com
> --- In "qrahlag" <> wrote:
>>
>> Hi,
>>
>> I see that my /proc/bus/usb/devices is missing. Perhaps that the
>> cause?
>>
>> I have so far only run loadUSBModules.sh to access by USB devices
>>
>> I have also tried to mount the filesystem:
>>
>> /dev/root on / type yaffs2 (rw)
>> none on /dev type devfs (rw)
>> /proc on /proc type proc (rw)
>> /proc/bus/usb on /flash type usbdevfs (rw)
>>
>> But still /proc/bus/usb contains no "devices"..
>>
>> Something else I have to do?
>>
>> / Hakan
>>
>>
>>
>>
>>
>>
>>
>> --- In "Baschieri Francesco"
>> <fbaschieri@> wrote:
>>>
>>> Hi,
>>>
>>> I'm facing the following problem on a TS-7200 board. The board is
>>> equipped with the standard TS-linux release and by loading the
>> proper
>>> modules I'm able to use a single bluetooth dongle.
>>>
>>> But when I plug another dongle into the 2nd USB port I'm unable do
>> make
>>> it work.
>>>
>>> The only way to bring it up is to make
>>>
>>> hciconfig hci0 down
>>>
>>> and then
>>> hciconfig hci1 up
>>>
>>> and then it works.
>>>
>>> But I'm only able to operate a single BT dongle at a time. On my
>>> development machine (laptop) everything works fine.
>>>
>>> Anyone facing the same problem?
>>>
>>> Tanks in advance
>>> Francesco
>>>
>>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|