please tell ... it would be great help if someone can tell whether
issue given below was resolved and if yes how ......
--- In "qrahlag" <> wrote:
>
> Hi,
>
> I see that my /proc/bus/usb/devices is missing. Perhaps that the
> cause?
>
> I have so far only run loadUSBModules.sh to access by USB devices
>
> I have also tried to mount the filesystem:
>
> /dev/root on / type yaffs2 (rw)
> none on /dev type devfs (rw)
> /proc on /proc type proc (rw)
> /proc/bus/usb on /flash type usbdevfs (rw)
>
> But still /proc/bus/usb contains no "devices"..
>
> Something else I have to do?
>
> / Hakan
>
>
>
>
>
>
>
> --- In "Baschieri Francesco"
> <fbaschieri@> wrote:
> >
> > Hi,
> >
> > I'm facing the following problem on a TS-7200 board. The board is
> > equipped with the standard TS-linux release and by loading the
> proper
> > modules I'm able to use a single bluetooth dongle.
> >
> > But when I plug another dongle into the 2nd USB port I'm unable do
> make
> > it work.
> >
> > The only way to bring it up is to make
> >
> > hciconfig hci0 down
> >
> > and then
> > hciconfig hci1 up
> >
> > and then it works.
> >
> > But I'm only able to operate a single BT dongle at a time. On my
> > development machine (laptop) everything works fine.
> >
> > Anyone facing the same problem?
> >
> > Tanks in advance
> > Francesco
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|