--- In Eddie Dawydiuk <> wrote:
>
> Hello,
>
> > I'm having a problem reliably putting the BAT3 board into sleep
mode.
> > I am running it on a TS-7300 CPU. I have fairly recent versions of
> > bat3, ups-monitor, tsuart0, and tsuart-bat3 installed.
> > The problem is that sometimes - not every time - that I invoke
sleep
> > mode, the BAT3 board goes into a cycle of removing power and
> > immediately re-applying power. It does this over and over until
the
> > specified sleep interval expires. It does this at a rate of about
> > twice a second.
> > The bat3 command line is simply "bat3 --sleep 10"
>
> I'm not able to reproduce this. Are you using any custom software?
> Can you provide any additional information on how to reproduce this?
>
> //Eddie
>
Eddie,
It fails pretty often after shutting down with "shutdown -h now",
removing then re-applying power, and waiting for full reboot.
If "bat3 --sleep 5" is issued at this point, it usually fails
as described.
-Paul
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|