Hello,
> I'm having a problem reliably putting the BAT3 board into sleep mode.
> I am running it on a TS-7300 CPU. I have fairly recent versions of
> bat3, ups-monitor, tsuart0, and tsuart-bat3 installed.
> The problem is that sometimes - not every time - that I invoke sleep
> mode, the BAT3 board goes into a cycle of removing power and
> immediately re-applying power. It does this over and over until the
> specified sleep interval expires. It does this at a rate of about
> twice a second.
> The bat3 command line is simply "bat3 --sleep 10"
I'm not able to reproduce this. Are you using any custom software?
Can you provide any additional information on how to reproduce this?
//Eddie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|