[ts-7000] Re:WinCE 6.0 on TS-7400?

To:	<>
Subject:	[ts-7000] Re:WinCE 6.0 on TS-7400?
From:	"Queisser, Andrew (Idol pick: Blake)" <>
Date:	Fri, 13 Apr 2007 20:07:00 -0000

I was planning on porting the Cirrus 6.0 BSP to my 7300 but the lack of JTAG scared me off a bit. I have a Cirrus board that works with 6.0 but I haven't analyzed the bootloader yet. I think I'll have someone solder the JTAG wires to the ARM and then give it a try.

Over on the Cirrus Arm forum there were a couple of guys that got CE (5?) going to some extent on the TS boards.

Andrew

__._,_.___

SPONSORED LINKS

`Single board computer`	`Hardware`	`Computer running slow`
`Linux os`	`Single board`

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Re:WinCE 6.0 on TS-7400?, Queisser, Andrew (Idol pick: Blake) <= Re: [ts-7000] Re:WinCE 6.0 on TS-7400?, Joel Winarske

Previous by Date:	[ts-7000] Re: BAT3 unreliable sleep mode, Paul
Next by Date:	[ts-7000] TS-K7V framebuffer, Yan Seiner
Previous by Thread:	[ts-7000] Kernel 2.6 on the TS-7200, ashandore
Next by Thread:	Re: [ts-7000] Re:WinCE 6.0 on TS-7400?, Joel Winarske
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU