[ts-7000] Blown serial port

To:
Subject:	[ts-7000] Blown serial port
From:	"Bob Moreland" <>
Date:	Tue, 10 Apr 2007 04:19:17 -0000

Hi,

I accidentally powered my TS7200 up with +12 volts instead of +5 volts
- just for a second. After quickly correcting the problem, the card
still boots and I can log in over the ethernet port. But, the serial
port is dead. Does anyone have some ideas on how to fix the serial
port? I see some fuses in the schematic but I cannot find them on the
board.

Thanks.



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Blown serial port, Bob Moreland <= Re: [ts-7000] Blown serial port, Jason Stahls

Previous by Date:	[ts-7000] TS-7400 host name lookup failure., Rob Gleich
Next by Date:	Re: [ts-7000] Java Step-by-Step, Christopher Friedt
Previous by Thread:	[ts-7000] TS-7400 host name lookup failure., Rob Gleich
Next by Thread:	Re: [ts-7000] Blown serial port, Jason Stahls
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU