Re: [ts-7000] Re: Greg Kroah-Hartman's response to SD-flash close source driver solution:

[Curtis Monroe <>]

On March 20, 2007 09:33 pm, charliem_1216 wrote:
>....
> Hi Curtis -
> 
> Have you tried the SD code in the kernel, as Greg suggested?  Of
> course this means using an up-to-date 2.6 kernel.  [Being able to use
> the on-going developments is one reason I prefer to work with 2.6
> kernels].
> 
> I don't have a SD-equipped board to try, but I'm interested in your
> experiences.
> 
> Regards, ...... Charlie
>

I haven't used the 2.6 MMC module. I looked at it a while ago. Its changed a 
lot since then.

I also don't have an SBC with SD hardware, I wired my own using the GPIOs

-Curtis.
 
> 


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/